Adventure Driven Talk

Tech Questions and How-To Articles => Mitsubishi Related => Topic started by: Flooder on September 30, 2019, 10:22:44 PM

Title: Rough Idle after work
Post by: Flooder on September 30, 2019, 10:22:44 PM
Hi Guys, I have a 2000 montero. I replaced the throttle control position switch and during the work I pulled off the negative terminal on the battery. When I put the terminal back on the idle runs rough. It is continually searching for the idle. Prior to the work I did the idle was fine.

Does anyone know how to fix this?