Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Lordtrunks

Pages: [1]
1
For Sale Automotive / Re: Aisin hubs for mitsubishi
« on: March 07, 2019, 08:43:52 PM »
SOLD

2
For Sale Automotive / Re: Gen 1 v6 montero Front diff(axle)
« on: March 05, 2019, 07:31:31 PM »
yep still have it i'm in payson arizona shipping shouldn't be a problem UPS will take it.

3
For Sale Automotive / Aisin hubs for mitsubishi
« on: February 26, 2019, 09:08:42 PM »
Pair o' aisin hubs $100 free shipping

4
For Sale Automotive / Re: Front Aussie Locker
« on: February 23, 2019, 11:23:58 PM »
sold

5
For Sale Automotive / Gen 1 v6 montero Front diff(axle)
« on: February 18, 2019, 01:49:17 PM »
Gen 1 V6 front diff(axle) with 4.62's and welded diff has the large Jack shaft flange making it an easy swap to the gen 2 100mm cv axles  $300

6
For Sale Automotive / 4.63 Gears
« on: February 18, 2019, 01:44:21 PM »
I've got a rear 4.63 r&p outta 95 sr Make me an offer

7
For Sale Automotive / Front Aussie Locker
« on: February 18, 2019, 01:40:10 PM »
Front aussie locker for 8" diff setup in a carrier. $200

8
Mighty Max/Triton / Re: 1983 Dodge Power Ram
« on: February 12, 2018, 03:13:32 PM »
I'm happy with moog's tie rods

9
Gen 1 Montero / Re: Weird Gen 1 dash issues
« on: November 05, 2017, 11:05:51 AM »
putting dielectric grease on them or one of the electric liquid tape over the connections after reattaching them will help keep away corrosion. changing out all the ground wires on the engine is also a good idea as the oe stuff is ageing and becoming stiff and cracking allowing water in.

I will add to inspect your starter wires for corrosion i've noticed the v6 models always having it growing up the starter wire, adding a starter relay/solenoid also makes a noticable difference.

10
I've also seen the tensioner bracket broken pretty common

11
Mitsubishi Related / Re: Custom ring and pinions
« on: August 03, 2017, 10:18:05 AM »
MB527147 front 8"
MB598487 rear 9"

Check with your dealer for them which they may or may not be able to get them, but they are showing in stock in japan so let me know and i'll direct you to a source for japan stock.

12
Mitsubishi Related / Re: Custom ring and pinions
« on: August 01, 2017, 07:49:16 PM »
If you want some 4.88's for your v6 those are still in stock in mitsu japan and if for some reason they sold out i have another non chinese company that i can help you get a set thru. let me know if you need those part numbers or help with getting the gears from either.

Pages: [1]