Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - reversecaoboy

Pages: [1] 2 3
Josh, I've been meaning to ask, How is the 5100/OME combo unloaded? I daily my Montero and usually the back is empty or has about 50lbs of crap back there, and when camping I hardly have any more than 200-300lbs.

Mitsubishi Related / Re: Off-road Overheating Issues
« on: September 05, 2018, 10:36:27 AM »
Good call.

Gonna give that a try!

Mitsubishi Related / Re: Off-road Overheating Issues
« on: August 27, 2018, 04:19:26 PM »
I noticed when I first got my rig, it would hover around 198* every day. (measured via scangauge)

However recently, it tends to sit at 202*, but it does creep up to 209 climbing grades, and at one point it hit 240* while climbing up white mountain in big bear.

I haven't touched anything, but I suspect me playing in mud got a lot of crud stuck between the fins of my radiator. I'm hoping a nice chemical flush and rodding the radiator will help me out.

Build Threads / Re: reversecaoboy's montebro
« on: August 27, 2018, 02:28:21 PM »
Did a couple things recently.

Kurt from Cruiser Outfitters hooked it up on some Aisin FM-002's. Last I spoke with him he still had a few sets in stock if any of y'all lookin.

And then @roaminglost on IG ended up selling his replica Ralliart Web Mags, so I had to cop.

Not liking the look of this tire size, so I'll be swapping my 265/75/16's from my old Weld Racing wheels onto these.

Gen 2 Montero / Re: Gen 2 suspension questions
« on: August 23, 2018, 03:09:53 PM »
Real good info toasty.

man those balljoints look good.

Oh...I should probably clean the drains.

Gen 2 Montero / Re: Gen2.5 EcuFlash Definition File
« on: July 17, 2018, 02:10:09 PM »
Much appreciated!

Build Threads / Re: 1999 Pajero NL "ROCKET" - Overland Build
« on: June 20, 2018, 02:33:56 PM »
Looks awesome.

I've been meaning to ask, how's the ride of the OME springs and ADD Billies unloaded?

I would really love to get the bilsteins but trying to minimize the amount of lift

Build Threads / Re: 1999 Pajero NL "ROCKET" - Overland Build
« on: June 15, 2018, 09:42:21 AM »
Good tips.

I've been meaning to do this for a while now. And give my airbox a good cleaning. It managed to get a bunch of mud down at the bottom.

Gen 2 Montero / Re: Other bumpers that fit? Swing-aways?
« on: June 13, 2018, 08:41:02 AM »
I've been interested in this too.

Mainly because with the spare mount on the rear door, it's a huge PITA to put on/take off my Trasharoo.

That and I already dropped one of my bumper end caps on a ledge and it's all bent outta wack.

Build Threads / Re: Goldi-Locker gets upgrades. 1999 Montero
« on: April 04, 2018, 10:59:54 AM »
Thank you for the tips on the suspension! It was a concern of mine and I was going to email about running the 5100's on stock springs. Guess I will be getting OME springs and torsion bars afterall.

Build Threads / Re: reversecaoboy's montebro
« on: March 26, 2018, 01:25:32 PM »
Mud stuff cuz we've had rain in Southern Cali lately.

Yes, I had to tow out my buddy's Rav4 twice that day.

Build Threads / Re: reversecaoboy's montebro
« on: March 20, 2018, 11:32:40 AM »
Out of curiosity I did not see mention of changing the front diff when you re-geared the rig.
And your soft pedal after caliper change, the shop probably let the fluid run out of the brake system and you have air in the ABS pump. Good luck with that, it can be a PIA getting the ABS bled out.

I didn't need to regear since I pulled the axle out of a 98 WP. I do have 4.63's sitting in my room waiting to be installed, but I just bought an entire TII drivetrain swap for my RX7 so regearing is on hold.

Ugh, not looking forward to that. I've just learned to keep my distance when driving. lol

Build Threads / Re: reversecaoboy's montebro
« on: March 20, 2018, 11:30:25 AM »
Can you share any tips and how to pull the rear axel. Iím going to look at a 99í Montero today to see if it has the rear dif. I have a 2000 mont endeavor just like yours and would like to add it. Was it only the winter package that had the rear dif? Are there cables I need to pull as well that are attchated to the rear axle? I saw you mentioned something about the computer above the rear speaker... do I take that as well?

I have no idea what Iím doing out there so any advice would not by over my head or to much.

Thanks! Iím enjoying your build thread since our cars are identical.

Sorry for not seeing this!

Yup, only the winter packages had the rear locker. Easiest way to check would to look for the orange sticker in the driver footwell or looking for the locker button. But if you'll be at a junkyard you can just crawl underneath and look if there is a hose coming out of the rear differential.

I ended up pulling the entire axle with hand brake cables and abs sensors and whatever crap was attached to it. You're gonna want a 24mm socket and wrench..and a breaker bar or power tools, but it's pretty straightforward once you're under there.

The ECU isn't necessary as some people have said, but i'd grab it to be safe. Just pull back all the rear plastics on the driver's side and you'll see some wires leading to under the window/around the rear speaker area. That's the ECU. Don't forget the grab the airpump and lines that is under the rear passenger seat (2nd row?) It's easiest to remove the seat, but you can still get it with the seat bolted. Flip down the cubby door, and there SHOULD be a metal plate towards the outside of the car. Pry back the carpet and youll find 2 or 3 10mm bolts that hold the plate in, which has the airpump attached to it.

Pages: [1] 2 3