Author Topic: Unloading a bunch of parts  (Read 2575 times)

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Unloading a bunch of parts
« on: February 19, 2018, 07:33:24 PM »
Time to down size like crazy, lots of stuff. Some parts will stay for sale until they are purchased, and other parts need to sell fast.

1. 4.90 front Ring and Pinion $150 (sport or gen 2 montero) SOLD

2. Rear 9" 3rd member 4.90, ARB Locker (sport) $900 SOLD

3. A box full of random brown interior parts, lots of stuff (gen 2 montero) $60 SOLD

4. Corner lights sold as sets (gen 2/gen 2.5 monteros) $10

5. 4.63 R&P front and Rear (gen 2.5 Momtero) $300 shipped SOLD

6. 3.5L DOHC parts lots of random stuff (ask and maybe I have 2 or 3 of them)

7. Freshly machined 3.5L DOHC heads, with new head gasket, and new head bolts. $300 SOLD

8. 2.6L cylinder head (clearwater) $200

9. Gen 2 transfer case (buy the case get the white ball shifter with it free) $100 SOLD

10. Gen 2 white ball transfer case shifters. $50 1 shifter left

11. 9.5" locking 3rd member 4.63 gears. $100 (gen 2/2.5 montero) SOLD

12. (Local pick up only) 35x12.5x15 tires on 15x10 steel wheels. These have been wheeled, 2 tires are beat pretty good, 2 others are ok. $400 if you buy them and mention ADD. SOLD

13. Gen 1 4cyl transfer case automatic SOLD

14. ITEM ADDED: Aftermarket Gen 2 fender flares. $100 bucks plus shipping. Let me know if interested. Check out attachment and hopefully it works, if not, email me and I can send a picture.

I'm sure there is so much more, but I'm not listing every single thing. Might be worth a shot to ask even If it's not listed. I might add more later.

Email me for a faster response

Keverett_85@yahoo.com
« Last Edit: April 03, 2018, 04:59:53 PM by PA_JERO »

USRWB

  • Member
  • Posts: 14
  • Karma: +0/-0
  • You bought that because why?
    • View Profile
Re: Unloading a bunch of parts
« Reply #1 on: February 19, 2018, 08:40:10 PM »
Email just sent -

Thanks!

reversecaoboy

  • Member
  • Posts: 45
  • Karma: +2/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #2 on: February 20, 2018, 10:36:18 AM »
Good guy!


that_guy_eric

  • Member
  • Posts: 25
  • Karma: +1/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #3 on: February 20, 2018, 11:51:56 PM »
Do those heads have new valve seals/guides?

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Re: Unloading a bunch of parts
« Reply #4 on: February 21, 2018, 08:22:41 AM »
I assume you mean the 3.5 heads? Yes. Freshly rebuilt heads that have never been torqued down to a block.

that_guy_eric

  • Member
  • Posts: 25
  • Karma: +1/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #5 on: February 21, 2018, 11:06:42 PM »
I assume you mean the 3.5 heads? Yes. Freshly rebuilt heads that have never been torqued down to a block.

Can you see what shipping would be to 84010? Thinking I may need these sooner than later for the 96.

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Re: Unloading a bunch of parts
« Reply #6 on: February 22, 2018, 07:13:15 AM »
Looks like prices could range, $50 to $65 for shipping. We can do $50 if you want to go for it. Let me know.

that_guy_eric

  • Member
  • Posts: 25
  • Karma: +1/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #7 on: February 22, 2018, 07:49:26 PM »
Looks like prices could range, $50 to $65 for shipping. We can do $50 if you want to go for it. Let me know.

Can you post a few pictures? And is there an invoice/itemized bill or work order from the shop showing everything they did?

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Re: Unloading a bunch of parts
« Reply #8 on: February 22, 2018, 09:20:27 PM »
I can do pictures, I don't have the receipts from the initial work done. All I can tell you is they were taken in to get a full valve job, resurfaced, and cleaned. Like I also said, they come with brand new head bolts and brand new head gaskets, which are all dealer purchased, genuine Mitsu parts. Send me your email or phone number and I will get you pictures tomorrow.

Zimdoc

  • Member
  • Posts: 10
  • Karma: +0/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #9 on: February 23, 2018, 11:31:08 PM »
Sent you a email. Haven't heard back. It was from zimdoc@gmail

that_guy_eric

  • Member
  • Posts: 25
  • Karma: +1/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #10 on: February 24, 2018, 11:50:53 AM »
I can do pictures, I don't have the receipts from the initial work done. All I can tell you is they were taken in to get a full valve job, resurfaced, and cleaned. Like I also said, they come with brand new head bolts and brand new head gaskets, which are all dealer purchased, genuine Mitsu parts. Send me your email or phone number and I will get you pictures tomorrow.

Sent you my email address on Thursday, let me know if you got it.

IncorpoRatedX

  • Not really the
  • Administrator
  • Member
  • Posts: 327
  • Karma: +28/-0
  • I'm big in Japan.
    • View Profile
    • Adventure Driven Design
Re: Unloading a bunch of parts
« Reply #11 on: February 24, 2018, 04:26:46 PM »
He's leading a trail run. :)

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Re: Unloading a bunch of parts
« Reply #12 on: February 24, 2018, 07:30:16 PM »
Sorry for the delay fellas, I have sent both of you messages.

PA_JERO

  • Member
  • Posts: 159
  • Karma: +17/-0
    • View Profile
Re: Unloading a bunch of parts
« Reply #13 on: February 25, 2018, 05:01:51 PM »
I have sent photos of the heads. Let me know. Thanks.

Zimdoc

  • Member
  • Posts: 10
  • Karma: +0/-0
  • I'm new here!
    • View Profile
Re: Unloading a bunch of parts
« Reply #14 on: February 27, 2018, 11:05:19 PM »
Did my email go through? Hoping some parts are still available.